Magnetic MoS2/Fe3O4 composite as an effective activator of persulfate for the degradation of tetracycline: performance, activation mechanisms and degradation pathways.

The activated persulfate (PS) process could produce sulfate radical (SO4·-) and rapidly degrade organic pollutants. The application of Fe3O4 as a promising PS activator was limited due to the rapid conversion of Fe2+ to Fe3+ on its surface. Mo4+ on MoS2 surface could be used as a reducing site to convert Fe3+ to Fe2+, but the separation and recovery of MoS2 was complex. In this study, MoS2/Fe3O4 was prepared to accelerate the Fe3+/Fe2+ cycle on Fe3O4 surface and achieved efficient separation of MoS2. The results showed that MoS2/Fe3O4 was more effective for PS activation compared to Fe3O4 or MoS2, with a removal efficiency of 91.8% for 20 mg·L-1 tetracycline (TC) solution under the optimal conditions. Fe2+ and Mo4+ on MoS2/Fe3O4 surface acted as active sites for PS activation with the generation of SO4•-, •OH, •O2-, and 1O2. Mo4+ acted as an electron donor to promote the Fe3+/Fe2+ cycling and thus improved the PS activation capability of MoS2/Fe3O4. The degradation pathways of TC were inferred as hydroxylation, ketylation of dimethylamino group and C-N bond breaking. This study provided a promising activated persulfate-based advanced oxidation process for the efficient degradation of TC by employing MoS2/Fe3O4 as an effective activator.

Micelle-directed self-assembly of single-crystal-like mesoporous stoichiometric oxides for high-performance lithium storage.

Due to their uncontrollable assembly and crystallization process, the synthesis of mesoporous metal oxide single crystals remains a formidable challenge. Herein, we report the synthesis of single-crystal-like mesoporous Li2TiSiO5 by using soft micelles as templates. The key lies in the atomic-scale self-assembly and step-crystallization processes, which ensure the formation of single-crystal-like mesoporous Li2TiSiO5 microparticles via an oriented attachment growth mechanism under the confinement of an in-situ formed carbon matrix. The mesoporous Li2TiSiO5 anode achieves a superior rate capability (148 mAh g-1 at 5.0 A g-1) and outstanding long-term cycling stability (138 mAh g-1 after 3000 cycles at 2.0 A g-1) for lithium storage as a result of the ultrafast Li+ diffusion caused by penetrating mesochannels and nanosized crystal frameworks (5-10 nm). In comparison, bulk Li2TiSiO5 exhibits poor rate capability and cycle performance due to micron-scale diffusion lengths. This method is very simple and reproducible, heralding a new way of designing and synthesizing mesoporous single crystals with controllable frameworks and chemical functionalities.

Corrigendum: A dynamics association study of gut barrier and microbiota in hyperuricemia.

[This corrects the article DOI: 10.3389/fmicb.2023.1287468.].

A dynamics association study of gut barrier and microbiota in hyperuricemia.

Introduction: The intricate interplay between gut microbiota and hyperuricemia remains a subject of growing interest. However, existing studies only provided snapshots of the gut microbiome at single time points, the temporal dynamics of gut microbiota alterations during hyperuricemia progression and the intricate interplay between the gut barrier and microbiota remain underexplored. Our investigation revealed compelling insights into the dynamic changes in both gut microbiota and intestinal barrier function throughout the course of hyperuricemia. Methods: The hyperuricemia mice (HY) were given intragastric administration of adenine and potassium oxalate. Gut microbiota was analyzed by 16S rRNA sequencing at 3, 7, 14, and 21 days after the start of the modeling process. Intestinal permeability as well as LPS, TNF-α, and IL-1ß levels were measured at 3, 7, 14, and 21 days. Results: We discovered that shifts in microbial community composition occur prior to the onset of hyperuricemia, key bacterial Bacteroidaceae, Bacteroides, and Blautia exhibited reduced levels, potentially fueling microbial dysbiosis as the disease progresses. During the course of hyperuricemia, the dynamic fluctuations in both uric acid levels and intestinal barrier function was accompanied with the depletion of key beneficial bacteria, including Prevotellaceae, Muribaculum, Parabacteroides, Akkermansia, and Bacteroides, and coincided with an increase in pathogenic bacteria such as Oscillibacter and Ruminiclostridium. This microbial community shift likely contributed to elevated lipopolysaccharide (LPS) and pro-inflammatory cytokine levels, ultimately promoting metabolic inflammation. The decline of Burkholderiaceae and Parasutterella was inversely related to uric acid levels, Conversely, key families Ruminococcaceae, Family_XIII, genera Anaeroplasma exhibited positive correlations with uric acid levels. Akkermansiaceae and Bacteroidaceae demonstrating negative correlations, while LPS-containing microbiota such as Desulfovibrio and Enterorhabdus exhibited positive correlations with intestinal permeability. Conclusion: In summary, this study offers a dynamic perspective on the complex interplay between gut microbiota, uric acid levels, and intestinal barrier function during hyperuricemia progression. Our study suggested that Ruminiclostridium, Bacteroides, Akkermansiaceae, Bilophila, Burkholderiaceae and Parasutterella were the key bacteria that play vital rols in the progress of hyperuricemia and compromised intestinal barrier, which provide a potential avenue for therapeutic interventions in hyperuricemia.

Effects of esketamine on postoperative rebound pain in patients undergoing unilateral total knee arthroplasty: a single-center, randomized, double-blind, placebo-controlled trial protocol.

Introduction: Rebound pain, transient and acute postoperative pain after the disappearance of regional block anesthesia, has been a concern in recent years. Insufficient preemptive analgesia and hyperalgesia induced by regional block are the main mechanisms. At present, the evidence for the treatment of rebound pain is limited. The esketamine, as an antagonist of the N-methyl-D-aspartate receptor, has been proven to prevent hyperalgesia. Therefore, this trial aims to evaluate the impact of esketamine on postoperative rebound pain in patients undergoing total knee arthroplasty. Methods/design: This study is a single-center, prospective, double-blind, randomized, placebo-controlled trial. Participants who plan to undergo total knee arthroplasty will be randomly assigned to the esketamine group (N = 178) and placebo group (N = 178) in a ratio of 1:1. This trial aims to evaluate the impact of esketamine on postoperative rebound pain in patients undergoing total knee arthroplasty. The primary outcome of this trial is the incidence of rebound pain within 12 h after the operation in the esketamine group and the placebo group. The secondary outcome will be to compare (1) the incidence of rebound pain 24 h after the operation; (2) the time to enter the pain cycle for the first time within 24 h after the procedure; (3) the first time of rebound pain occurred within 24 h after surgery; (4) the modified rebound pain score; (5) NRS score under rest and exercise at different time points; (6) the cumulative opioid consumption at different time points; (7) patient's prognosis and knee joint function evaluation; (8) blood glucose and cortisol concentration; (9) patient's satisfaction score; (10) adverse reactions and adverse events. Discussion: The effect of ketamine on preventing postoperative rebound pain is contradictory and uncertain. The affinity of esketamine to the N-methyl-D-aspartate receptor is about four times higher than levo-ketamine, the analgesic effect is 3 times higher than levo-ketamine, and there are fewer adverse mental reactions. To our knowledge, there is no randomized controlled trial to verify the impact of esketamine on postoperative rebound pain in patients undergoing total knee arthroplasty. Therefore, this trial is expected to fill an important gap in relevant fields and provide novel evidence for individualized pain management. Clinical Trial Registration: http://www.chictr.org.cn, identifier ChiCTR2300069044.

Remodeling nanodroplets into hierarchical mesoporous silica nanoreactors with multiple chambers.

Multi-chambered architectures have attracted much attention due to the ability to establish multifunctional partitions in different chambers, but manipulating the chamber numbers and coupling multi-functionality within the multi-chambered mesoporous nanoparticle remains a challenge. Herein, we propose a nanodroplet remodeling strategy for the synthesis of hierarchical multi-chambered mesoporous silica nanoparticles with tunable architectures. Typically, the dual-chambered nanoparticles with a high surface area of ~469 m2 g-1 present two interconnected cavities like a calabash. Furthermore, based on this nanodroplet remodeling strategy, multiple species (magnetic, catalytic, optic, etc.) can be separately anchored in different chamber without obvious mutual-crosstalk. We design a dual-chambered mesoporous nanoreactors with spatial isolation of Au and Pd active-sites for the cascade synthesis of 2-phenylindole from 1-nitro-2-(phenylethynyl)benzene. Due to the efficient mass transfer of reactants and intermediates in the dual-chambered structure, the selectivity of the target product reaches to ~76.5%, far exceeding that of single-chambered nanoreactors (~41.3%).

Synthesis of Fully Exposed Single-Atom-Layer Metal Clusters on 2D Ordered Mesoporous TiO2 Nanosheets.

A sulfhydryl monomicelles interfacial assembly strategy is presented for the synthesis of fully exposed single-atom-layer Pt clusters on 2D mesoporous TiO2 (SAL-Pt@mTiO2 ) nanosheets. This synthesis features the introduction of the sulfhydryl group in monomicelles to finely realize the controllable co-assembly process of Pt precursors within ordered mesostructures. The resultant SAL-Pt@mTiO2 shows uniform SAL Pt clusters (≈1.2 nm) anchored in ultrathin 2D nanosheets (≈7 nm) with a high surface area (139 m2 g-1 ), a large pore size (≈25 nm) and a high dispersion (≈99 %). Moreover, this strategy is universal for the synthesis of other SAL metal clusters (Pd and Au) on 2D mTiO2 with high exposure and accessibility. When used as a catalyst for hydrogenation of 4-nitrostyrene, the SAL-Pt@mTiO2 shows a high catalytic activity (TOF up to 2424 h-1 ), 100 % selectivity for 4-aminostyrene, good stability, and anti-resistance to thiourea poisoning under relatively mild conditions (25 °C, 10 bar).

Evaluation of double-high insert mid-term outcomes in cruciate-retaining medial-pivotal total knee arthroplasty - a propensity score-matched analysis with averaged 8-year follow-up.

BACKGROUND: This study aimed to compare the mid-term clinical and radiographic outcomes between medial-pivotal (MP) insert and double-high (DH) insert used under the cruciate-retaining condition in ADVANCE® total knee arthroplasty (TKA). METHODS: The follow-up was conducted for 158 consecutive patients who underwent unilateral ADVANCE® TKA from January 2011 to April 2014. Eighty-four MP inserts and 74 DH inserts were used under cruciate-retaining conditions. A 1:1 propensity score matching (PSM) analysis was performed between MP inserts and DH inserts to compare the clinical and radiographic outcomes. RESULTS: After a 1:1 PSM, 120 patients (60 pairs) were matched between the MP and DH inserts groups. The baseline demographic parameters and clinical scores were comparable between the two groups. The postoperative clinical outcomes at an averaged 8-year follow-up of both groups were significantly improved. The range of motion (ROM) of the DH group was better than that of the MP group, and equivalent Knee Society Function Score (KSFS) between the two groups was found. However, the Knee Society Score (KSS), Western Ontario and McMaster Universities Arthritis Index (WOMAC) score, and Forgotten Joint Score (FJS) of the MP group were found to be significantly superior to those of the DH group. Comparable complication and revision rates were observed between the two groups. The radiographic results were also equally good between MP and DH groups. CONCLUSIONS: Although the mid-term clinical and radiographic outcomes of the DH inserts are fairly good, the clinical scores of the DH group were worse than those of the MP group.

Inactivation of Pseudomonas aeruginosa biofilms by thymoquinone in combination with nisin.

Pseudomonas aeruginosa is one of the most important foodborne pathogens that can persist in leafy green vegetables and subsequently produce biofilms. In this study, the synergistic effect of thymoquinone and nisin in reducing biofilm formation of P. aeruginosa on lettuce was evaluated, and their anti-virulence and anti-biofilm mechanisms were also investigated. At concentrations ranging from 0.5 to 2 mg/ml, thymoquinone inhibited the production of autoinducers and virulence factors, and enhanced the susceptibility of P. aeruginosa biofilms to nisin as evidenced by the scanning electron microscopy and confocal laser scanning microscopy. Integrated transcriptomics, metabolomics, and docking analyses indicated that thymoquinone treatment disrupted the quorum sensing (QS) system, altered cell membrane component, and down-regulated the expressions of genes related to virulence, efflux pump, and antioxidation. The changed membrane component and repressed efflux pump system enhanced membrane permeability and facilitated the entrance of nisin into cells, thus improving the susceptibility of biofilms to nisin. The dysfunctional QS and repressed antioxidant enzymes lead to the enhancement of oxidative stress. The enhanced oxidative stress disrupted energy metabolism and protein metabolism and ultimately attenuated the virulence and pathogenicity of P. aeruginosa PAO1. Our study indicated that thymoquinone has the potential to function as a QS-based agent to defend against foodborne pathogens in combination with nisin.

Monodisperse Ultrahigh Nitrogen-Containing Mesoporous Carbon Nanospheres from Melamine-Formaldehyde Resin.

An aqueous emulsion polymerization self-assembly approach is demonstrated for the first time to synthesize ultrahigh nitrogen containing mesoporous polymer nanospheres, using melamine-formaldehyde resin oligomers as precursors. In the synthesis, change from alkaline to acidic conditions is critical for the formation of monodisperse mesostructured polymer nanospheres. Owing to unique structure of triazine stabilized in the covalent polymeric networks during the pyrolysis process, the derived mesoporous carbon nanospheres possess an ultrahigh nitrogen content (up to 15.6 wt%) even after pyrolysis at 800 °C, which is the highest nitrogen content among mesoporous carbon nanospheres. Furthermore, these monodisperse mesoporous carbon nanospheres possess a high surface area (≈883 m2 g-1 ) and large pore size (≈8.1 nm). As an anode for sodium-ion batteries, the ultrahigh nitrogen-containing mesoporous carbon nanospheres exhibit superior rate capability (117 mAh g-1 at a high current density of 3 A g-1 ) and high reversible capacity (373 mAh g-1 at 0.06 A g-1 ), indicating a promising material for energy storage.

Interfacial Assembly and Applications of Functional Mesoporous Materials.

Functional mesoporous materials have gained tremendous attention due to their distinctive properties and potential applications. In recent decades, the self-assembly of micelles and framework precursors into mesostructures on the liquid-solid, liquid-liquid, and gas-liquid interface has been explored in the construction of functional mesoporous materials with diverse compositions, morphologies, mesostructures, and pore sizes. Compared with the one-phase solution synthetic approach, the introduction of a two-phase interface in the synthetic system changes self-assembly behaviors between micelles and framework species, leading to the possibility for the on-demand fabrication of unique mesoporous architectures. In addition, controlling the interfacial tension is critical to manipulate the self-assembly process for precise synthesis. In particular, recent breakthroughs based on the concept of the "monomicelles" assembly mechanism are very promising and interesting for the synthesis of functional mesoporous materials with the precise control. In this review, we highlight the synthetic strategies, principles, and interface engineering at the macroscale, microscale, and nanoscale for oriented interfacial assembly of functional mesoporous materials over the past 10 years. The potential applications in various fields, including adsorption, separation, sensors, catalysis, energy storage, solar cells, and biomedicine, are discussed. Finally, we also propose the remaining challenges, possible directions, and opportunities in this field for the future outlook.

Effects of the Local Bone Renin-Angiotensin System on Titanium-Particle-Induced Periprosthetic Osteolysis.

Wear particles may induce osteoclast formation and osteoblast inhibition that lead to periprosthetic osteolysis (PPOL) and subsequent aseptic loosening, which is the primary reason for total joint arthroplasty failure. Local bone renin-angiotensin system (RAS) has been found to participate in the pathogenic process of various bone-related diseases via promoting bone resorption and inhibiting bone formation. However, it remains unclear whether and how local bone RAS participates in wear-particle-induced PPOL. In this study, we investigated the potential role of RAS in titanium (Ti) particle-induced osteolysis in vivo and osteoclast and osteoblast differentiation in vitro. We found that the expressions of AT1R, AT2R and ACE in the interface membrane from patients with PPOL and in calvarial tissues from a murine model of Ti-particle-induced osteolysis were up-regulated, but the increase of ACE in the calvarial tissues was abrogated by perindopril. Moreover, perindopril mitigated the Ti-particle-induced osteolysis in the murine model by suppressing bone resorption and increasing bone formation. We also observed in RAW264.7 macrophages that Ang II promoted but perindopril suppressed Ti-particle-induced osteoclastogenesis, osteoclast-mediated bone resorption and expression of osteoclast-related genes. Meanwhile, Ang II enhanced but perindopril repressed Ti-particle-induced suppression of osteogenic differentiation and expression of osteoblast-specific genes in mouse bone marrow mesenchymal stem cells (BMSCs). In addition, local bone RAS promoted Ti-particle-induced osteolysis by increasing bone resorption and decreasing bone formation through modulating the RANKL/RANK and Wnt/ß-catenin pathways. Taken together, we suggest that inhibition of RAS may be a potential approach to the treatment of wear-particle-induced PPOL.

Angiotensin II upregulates RANKL/NFATC1 expression in synovial cells from patients with rheumatoid arthritis through the ERK1/2 and JNK pathways.

BACKGROUND: Angiotensin II (Ang II) is associated with rheumatoid arthritis (RA) development. The present study investigated the impact of Ang II on the expression of receptor activator of nuclear factor-κB ligand (RANKL), as well as of nuclear factor of activated T cells cytoplasmic 1 (NFATC1) in RA synovial cells, and explored the underlying mechanism. METHODS: The expression levels of RANKL, NFATC1, and Ang II type 1 receptor (AT1R) were analyzed by RT PCR, western-blot, and/or immunohistochemistry. Western blot was also used to analyze the p38MAPK, JNK, and ERK1/2 pathways. RESULTS: The expressions of RANKL and NFATC1 increased in synovial tissues of RA compared to osteoarthritis (OA) synovial tissues. The expression of RANKL was upregulated by Ang II, and this effect was mitigated by an AT1R blocker but not by an AT2R blocker. Furthermore, Ang II activated the ERK1/2, JNK, and p38MAPK pathways, and this effect was blocked by the AT1R blocker. However, ERK1/2 and JNK inhibitors, but not a p38MAPK inhibitor, blocked Ang II-induced RANKL expression. Ang II also increased the level of NFATC1, and this upregulation was attenuated by AT1R blockade, ERK1/2 and JNK inhibition, and siRNA-mediated RANKL silencing, but not by AT2R blockade or p38MAPK inhibition. CONCLUSION: Our results indicated that Ang II activated the ERK1/2 and JNK pathways via AT1R, thus upregulating RANKL and NFATC1 expressions in RA synovial cells.

General Synthesis of Ultrafine Monodispersed Hybrid Nanoparticles from Highly Stable Monomicelles.

Ultrafine nanoparticles with organic-inorganic hybridization have essential roles in myriad applications. Over the past three decades, although various efforts on the formation of organic or inorganic ultrasmall nanoparticles have been made, ultrafine organic-inorganic hybrid nanoparticles have scarcely been achieved. Herein, a family of ultrasmall hybrid nanoparticles with a monodisperse, uniform size is synthesized by a facile thermo-kinetics-mediated copolymer monomicelle approach. These thermo-kinetics-mediated monomicelles with amphiphilic ABC triblock copolymers are structurally robust due to their solidified polystyrene core, endowing them with ultrahigh thermodynamic stability, which is difficult to achieve using Pluronic surfactant-based micelles (e.g., F127). This great stability combined with a core-shell-corona structure makes the monodispersed monomicelles a robust template for the precise synthesis of ultrasmall hybrid nanoparticles with a highly uniform size. As a demonstration, the obtained micelles/SiO2 hybrid nanoparticles display ultrafine sizes, excellent uniformity, monodispersity, and tunable structural parameters (diameters: 24-47 nm and thin shell thickness: 2.0-4.0 nm). Notably, this approach is universal for creating a variety of multifunctional ultrasmall hybrid nanostructures, involving organic/organic micelle/polymers (polydopamine) nanoparticles, organic/inorganic micelle/metal oxides (ZnO, TiO2 , Fe2 O3 ), micelle/hydroxides (Co(OH)2 ), micelle/noble metals (Ag), and micelle/TiO2 /SiO2 hybrid composites. As a proof of concept, the ultrasmall micelle/SiO2 hybrid nanoparticles demonstrate superior toughness as biomimetic materials.

Mid-term clinical outcomes and survivorship of medial-pivot total knee arthroplasty-a mean five year follow-up based on one thousand, one hundred and twenty eight cases.

PURPOSE: The unique medial-pivot (MP) design of ADVANCE® system largely simulates the movement of a normal knee joint and a high mid- and long-term success rate has been reported in limited populations. The aims of this study are to investigate the mid-term clinical outcomes and survivorship based on a large cohort with 1128 cases. METHODS: One thousand seven patients received 1276 ADVANCE® MP TKAs from January 2011 to April 2016 in our institution were retrospectively investigated. The range of motion (ROM), the Knee Society Score (KSS), the Knee Society Function Score (KSFS), the Western Ontario and McMaster Universities Arthritis Index (WOMAC) score, and the Forgotten Joint Score (FJS) were used to evaluate clinical outcomes and Kaplan-Meier survival curve was used to calculate the survivorship. RESULTS: In an averaged five year follow-up, the results of 879 patients (1128 knees) were successfully obtained and the clinical outcomes of 1107 knees were recorded. One hundred forty-eight knees (11.6%) were lost to follow-up. Excellent mid-term ROM, KSS, KSFS, and WOMAC score were recorded. A total of 53 complications were identified and most complications were related to the discordance of femoropatellar joint. Taking revision for any reason as end point, the overall survivorship was 99.2% at seven years. When taking all cases lost to follow-up as failures, the survivorship was 83.8% at five years and 50.6% at seven years. CONCLUSION: For MP designs, the intermediate clinical outcomes are good to excellent and the mid-term survivorship related to reasons other than infection is also satisfactory.

Comparative study on mid- and long-term clinical effects of medial pivot prosthesis and posterior-stabilized prosthesis after total knee arthroplasty.

OBJECTIVE: The purpose of this study was to explore the mid-and long-term clinical effects of Chinese patients with medial pivot (MP) prosthesis and posterior-stabilized (PS) prosthesis after total knee arthroplasty (TKA), to provide a reference for the recommendation of clinical prostheses. METHODS: A retrospective analysis of 802 patients who received TKA was performed from June 2010 to December 2013. A total of 432 patients received a MP prosthesis (MP group) and 375 patients received a PS prosthesis (PS group). Postoperative range of motion (ROM), clinical scores including the knee scoring system (KSS), the Western Ontario and McMaster Universities osteoarthritis index (WOMAC), the forgotten joint score (FJS), and postoperative complications were compared between the two groups. RESULTS: A total of 527 patients were followed up, including 290 in the MP group and 237 in the PS group. Both groups achieved satisfactory results in terms of KSS score, WOMAC score, and postoperative ROM, which were significantly improved compared with those before surgery, but the difference between the groups was not statistically significant (P > 0.05). The FJS scores of the MP group and the PS group were satisfactory and no significant difference was observed (P = 0.426). Postoperative complications occurred in 5 and 11 patients in the MP group and PS group, respectively. CONCLUSION: The clinical results of TKA with MP or PS in Chinese patients at mid- and long-term are encouraging, and no significant differences were observed between the two types of prostheses. Studies have also shown that both prostheses are safe for Chinese patients.

Angiotensin II inhibits osteogenic differentiation of isolated synoviocytes by increasing DKK-1 expression.

The renin-angiotensin system contributes to the pathogenesis of rheumatoid arthritis, but that the mechanism is unclear. This study aims to investigate the effect of angiotensin II (Ang II) on osteogenic differentiation of synoviocytes and the underlying mechanism. Ang II was showed to inhibite osteogenic differentiation of synoviocytes, which was mitigated by a Dickkopf-1 (DKK-1) inhibitor. DKK-1 was upregulated by Ang II, which was weakened by the Ang II type 1 receptor (AT1R) blocker, reactive oxygen species (ROS) scavenger, and p38 inhibitor. Ang II increased the levels of AT1R, ROS, and NADPH oxidase (NOX), and the upregulations were mitigated by the AT1R blocker or NOX inhibitor. Furthermore, Ang II activated the p38 pathway, which was blocked by the AT1R blocker, ROS scavenger, or siRNA-MKK3. In brief, these results indicate that Ang II upregulates NOX expression and ROS production via AT1R, activates the MKK3/p38 signaling, and in turn upregulates DKK-1 expression, participating in the inhibition of osteogenic differentiation of synoviocytes.

Sequential Chemistry Toward Core-Shell Structured Metal Sulfides as Stable and Highly Efficient Visible-Light Photocatalysts.

A universal sequential synthesis strategy in aqueous solution is presented for highly uniform core-shell structured photocatalysts, which consist of a metal sulfide light absorber core and a metal sulfide co-catalyst shell. We show that the sequential chemistry can drive the formation of unique core-shell structures controlled by the constant of solubility product of metal sulfides. A variety of metal sulfide core-shell structures have been demonstrated, including CdS@CoSx , CdS@MnSx , CdS@NiSx , CdS@ZnSx , CuS@CdS, and more complexed CdS@ZnSx @CoSx . The obtained strawberry-like CdS@CoSx core-shell structures exhibit a high photocatalytic H2 production activity of 3.92 mmol h-1 and an impressive apparent quantum efficiency of 67.3 % at 420 nm, which is much better than that of pure CdS nanoballs (0.28 mmol h-1 ), CdS/CoSx composites (0.57 mmol h-1 ), and 5 %wt Pt-loaded CdS photocatalysts (1.84 mmol h-1 ).

Association Between the Angiotensin-Converting Enzyme Gene Insertion/Deletion Polymorphism and Avascular Necrosis of the Femoral Head.

Objective: This study investigated the association between the angiotensin-converting enzyme (ACE) gene insertion/deletion (I/D) polymorphism and avascular necrosis of the femoral head (ANFH). Materials and Methods: The ACE gene I/D polymorphism was determined in 279 nontraumatic, ANFH Han Chinese patients (divided into idiopathic and steroid- and alcohol-induced subgroups) and 276 age- and gender-matched healthy controls using the polymerase chain reaction. Results: The frequencies of the ACE DD genotype and D allele were significantly higher among the ANFH patients as a whole and also in the idiopathic and steroid- and alcohol-induced ANFH subgroups compared to healthy controls (p < 0.05 for all). Additionally, the DD genotype, compared with the ID+II, ID, and II genotypes, conferred a higher risk of developing ANFH across all clinical subgroups (p < 0.001, odds ratio [OR] = 2.508; p < 0.001, OR = 2.072; p < 0.001, OR = 3.684, respectively) as well in each of the subgroups examined individually, including the idiopathic subgroup (p < 0.001, OR = 2.579; p < 0.001, OR = 2.091; p < 0.001, OR = 3.994, respectively), the steroid-induced subgroup (p = 0.005, OR = 2.345; p = 0.031, OR = 2.050; p = 0.007, OR = 3.000, respectively), and the alcohol-induced subgroup (p < 0.001, OR = 2.488; p = 0.012, OR = 2.050; p = 0.011, OR = 2.659, respectively) of ANFH patients. The ID genotype, compared with the II genotype, conferred a higher risk across all subtypes analyzed together, and in the idiopathic subgroup (p = 0.013, OR = 1.778; p = 0.028, OR = 1.910) analyzed separately. Additionally, the D allele, in comparison with the I allele, conferred a relatively higher risk across all subgroups (p < 0.001, OR = 2.101) as well as in each of the three subgroups examined individually (idiopathic: p < 0.001, OR = 2.178; steroid-induced: p = 0.003, OR = 1.910; and alcohol-induced: p < 0.001, OR = 2.094). Conclusion: The ACE DD and ID genotypes and D allele may be risk factors for susceptibility to ANFH in the Chinese population.

Molecular Design Strategy for Ordered Mesoporous Stoichiometric Metal Oxide.

A molecular design strategy is used to construct ordered mesoporous Ti3+ -doped Li4 Ti5 O12 nanocrystal frameworks (OM-Ti3+ -Li4 Ti5 O12 ) by the stoichiometric cationic coordination assembly process. Ti4+ /Li+ -citrate chelate is designed as a new molecular precursor, in which the citrate can not only stoichiometrically coordinate Ti4+ with Li+ homogeneously at the atomic scale, but also interact strongly with the PEO segments in the Pluronic F127. These features make the co-assembly and crystallization process more controllable, thus benefiting for the formation of the ordered mesostructures. The resultant OM-Ti3+ -Li4 Ti5 O12 shows excellent rate (143 mAh g-1 at 30 C) and cycling performances (<0.005 % fading per cycle). This work could open a facile avenue to constructing stoichiometric ordered mesoporous oxides or minerals with highly crystalline frameworks.